Leave your router's installation CD in the box, you won't need.
Be sure your computer obtains IP addresses automatically from your existing router or network via dhcp.
The router should do a reset now.What's New: Adds Linksys EasyLink Advisor (lela) 3 support.I use the router at home with no problems (we had a desktop and a laptop using it; now just the laptop).30 sec and try to open http.Wait for the router to finish the boot process (the power light stops flashing then press the reset button on the back for 5 seconds.Do not shadow of destiny cso go further until you can see the message.You should see the following screen: You must have to set a new username / password for the router's admin interface.I contacted Cisco and was told that no firmware updates are available for my router since it is out of warranty.Resolves issue with not being able to conduct configuration backup when accessing the router via https.Replace factory firmware on a Linksys WRT54GL Router to DD-WRT.(In case of upgrading the original Linksys firmware, you must upgrade to the mini version of DD-WRT first).
But not at home.
After 3-4 minutes "Upgrade successful" will come.Some of the KF discussions I've been following suggest updating the router's firmware so the KF will recognize and connect.(I'll be a lot more thankful when this issue is settled and my KF works at home) hsthomas.Browse to the mini firware which you have previously downloaded, then press upgrade.If you cannot connect, then reboot your computer then try again.Now you have a new firmware in your router, now you need to load your hotspot settings.Repeat step 4 and upgrade the firmware again with the standard generic firmware.Open a browser and type http (login: admin, passwd: admin).I contacted Amazon and was told that the problem was in my router.