Go to the, start Menu.
Convert a, pLC's, rS485 into a USB host port for connecting to say a mouse or a serial printer!
PC's, uSB port to RS485.Connections, uSB port; type-A male, serial/COM/RS232/DB9 port; 9-pin male, general.However, since Auto485 is not port powered, it may be less convenient to use mamas and papas pro tec car seat manual than the U-485 converter for programming purpose.Auto485 converter to convert the RS232 port into an RS485 port.Windows compatibility with plug-and-play installation and hot-swappability help provide seamless use without inconvenient and frustrating device conflicts.All TRilogi brand of PLCs have at least 1 built-in RS485 port and on Nano-10 that's its only serial port).FCC, uSB.0, uSB.1, roHS, wEEE.system Requirements, windows XP/Vista/7/8/8.1/10 or Linux or Mac.x/10.x or above.COM1, COM2, COM3, etc.).Package Contents, uSB to Serial Converter, instructions and driver.With U-485 you can use the i-TRilogi TLServer software to program a network of M-series, F-series and/or Nano-10 PLCs from a single.
Other Drivers (Mac, Linux, Windows2000/98/95/Me).Plug in USB connector to USB port.USB-RS232 converter, another option is to use the.Click "Next select search for the best driver for your device click "Next windows will ask you to specify the location of the driver.Transfer rate: up to 115 kbps.The converter is powered directly by the USB port and hence minimal wiring is required to connect your PC to any devices that has two-wire RS485 interface (e.g.